Pro-Made Coils by SquidDoode – Framed Staple Coils


The Framed Staple Coil is an advanced coil concept thought up by the famous Squiddoode which combines the best performance attributes of a Fused Clapton and a Staple Coil. These coils were hand made by the master himself using 6 pieces of stacked 0.5mm/0.1mm Kanthal-A1 Ribbon wire with 2 pieces of 26g Anarchist Competition (26AN80) wire on each side fused together with 36g Nichrome 80 (36TMN80) and are approximately 0.13-0.19ohm each (single coil resistance).

These are high performance coils intended to only be used with high drain batteries by experienced users. Each coil is made in the USA with the highest standard out there. If you are unfamiliar with @squidoode’s work, his quality alone speaks for itself. This product produces incredible flavor while maintaining an equal balance of great vapor production. Warmth can be controlled and is only limited by the airflow of your atomizer. With proper installation and care, a set of these coils can easily last you 2-4 months.

5 wraps – 2.5mm I.D.
Single Coil = 0.16ohm – 0.19ohm
Dual Coil = 0.08ohm – 0.10ohm
Note: coil distance from post can often affect resistance.

Sold Out

  • Weight 20 g
    Product Parameters

    -36ga Twistedmesses Nichrome80 over 6pcs of .5x.1mm Kanthal A1 Ribbon Wire & 2pcs of 26ga Anarchist wire on the sides
    -5 wraps – 2.5mm I.D.
    -Single Coil = 0.16ohm – 0.19ohm
    -Dual Coil = 0.08ohm – 0.10ohm

    Package Contents

    Two Framed staple coils handcrafted by @squidoode